ClearShield™ 3 Mil Gloss UV Premium Low Melt laminating film provides the clarity and adhesive strength needed to protect inkjet prints on bond papers or inkjet photo papers with microporous coatings. This film is also good for protecting photographs processed through photo imagers such as the Durst Lambda, Lightjet or Chromira or graphics printed on electrographic (toner-based) printers.
The exceptional clarity of the premium-grade film comes from its composition. Compared to standard polyester films, Gloss UV Premium Low Melt films have a higher ratio of polyester than adhesive.
3 Mil Gloss UV Premium Low Melt contains UV inhibitors to protect the film and underlying graphics from the damaging effects of exposure to sunlight and fluorescent lights. The film itself provides a high level of protection from abrasion, water, and exposure to oil, acids and cleaning solutions.
The film is called "low-melt" because it is backed by a heat-activated (thermal) adhesive that softens and starts bonding to the print at lower temperatures than conventional thermal laminating films.
KSP - Protects prints from abrasion, water, and exposure to common chemicals.
KSP - Ideal for laminating inkjet prints on bond or microporous papers or conventional photo prints.
KSP - 3-mil, very clear polyester laminating film with a strong, low-melt adhesive.
Low melting point designed for inkjet and photographic media
Wet gloss surface
Trade show graphics
Flexibility with lay-flat features
Easy to clean with household chemicals
Surface: .92 mil Polyester Film; Adhesive: 2 mil Coextrusion
Heat Seal Initiation
170° F (78° C) 1/2 sec. dwell @ 40 psi
Processing Temperature Range
170° to 245° F
Coefficient of Friction
Test Method: ASTM D 1894. .40 Kinetic
Test Method: Perkin-Elmer Spectrophotometer. 85% Min
Test Method: Perkin-Elmer Spectrophotometer. 100%
Product Performance & Suitability
Updated over 5 years ago