LexJet 10 Mil ArmorGuard Ti

Gauge

10 mil
Surface: 7 mil Polyester Film; Adhesive: 3 mil Coextrusion

Gloss

Test Method: 60o Gardner Gloss
20%

Heat Seal Initiation Temperature
(.5 Sec Dwell @ 40 psi)

170°F (78°C)

Processing Temperature Range

170°F to 245°F

Coefficient of Friction

Test Method: ASTM D 1894
.40 Kinetic

UVA Absorption

Test Method: Perkin-Elmer Spectrophotometer
85% Minimum

UVB Absorption

Test Method: Perkin-Elmer Spectrophotometer
100%

Abrasion Resistance

Test Method: Taber Abrasion-ASTM D 1044 CS-10F Wheel 500 gram weight: 100 cycles

Solvent Resistance

Test Method: Contact for 1/2 hour at 70oF
No Visible Effect: Acetone, Butyl Cellosolve, Cyclohexanone, Ethyl
Acetate, Hexane, Isopropyl Alcohol, MEK, Methylene Chloride,
Toluene, Xylene.

Solvent Resistance

Test Method: Contact for 24 hours at 120oF
No Visible Effect: Clorox3, Coffee, Downy1, Fantastik2, Formula 4093, Ketchup, Lemon Juice, Mr. Clean1,
Mustard (slight yellow stain),
Spray ‘N Wash2, Tea, Tomato Juice, Top Job1, Wisk4