EnduraFab™ Frontlit FR is a fire retardant, 18-mil / 6 oz / sq yd, 100% polyester warp knit fabric that has excellent drape, is wrinkle resistant, and has an enhanced resistance to scuffing and scratching. A lightweight fabric ideal for drapes, table skirts, exhibits, SEG graphics, retail signage and indoor banners, EnduraFab™ Frontlit FR meets the flammability standard for NFPA 701, 2015 Edition, (Test 1, Small Scale).
EnduraFab™ Frontlit FR is proudly made in the USA.
Specially designed for latex printing.
Enhanced resistance to scuffing & scratching
Excellent drape quality
Silicone edge graphics
Fire Retardant NFPA 701
Proprietary Surface Treatment
Wash-ability, tested in normal washing cycle conditions.
6.0 oz / sq yd (+/- 0.5) / 171 gsm
Gloss Level (60)
EnduraFab™ Frontlit FR was designed specifically for use with 3rd generation HP latex inks. Printer compatibility can and does vary. Testing is recommended.
Print Durability (Dry Abrasion, after heat set)
4 ASTM F 1571-95
Print Durability (Scratch Abrasion, after heat set)
2 ISO 1518-2:2011
Heat set is recommended for the FR treated EnduraFab™ Frontlit FR to ensure durability standards reach the desired physicals listed above under durability.
NFPA 701, 2015 Edition, (Test 1, Small Scale).
61 in x 10 yds
61 in x 25 yds
61 in x 50 yds
126 in x 100 yds
Updated about 4 years ago