LexJet 5 Mil ArmorGuard Ultra Low Gloss

Gauge

5 mil Surface: 3 mil Polyester Film

Gloss

Test Method: 60° Gardner Gloss 35%

Heat Seal Initiation Temperature
(.5 Sec Dwell @ 40 psi)

180°F (78°C)

Processing Temperature Range

180°F to 245°F

Coefficient of Friction

Test Method: ASTM D 1894
.40 Kinetic

UVA Absorption

Test Method: Perkin-Elmer Spectrophotometer
85% Minimum

UVB Absorption

Test Method: Perkin-Elmer Spectrophotometer
100%

Abrasion Resistance

Test Method: Taber Abrasion-ASTM D 1044 CS-10F Wheel 500 gram
weight: 100 cycles

Solvent Resistance

Test Method: Contact for 1/2 hour at 70°F
No Visible Effect: Acetone, Butyl Cellosolve, Cyclohexanone, Ethyl Acetate, Hexane, Isopropyl Alcohol,
MEK, Methylene Chloride, Toluene, Xylene.

Solvent Resistance

Test Method: Contact for 24 hours at 120°F No Visible Effect: Clorox3
, Coffee, Downy1
, Fantastik2
, Formula
4093
, Ketchup, Lemon Juice, Mr. Clean1
, Mustard (slight yellow stain), Spray ‘N Wash2
, Tea, Tomato Juice,
Top Job1
, Wisk4