LexJet Poly Select Light SUV is an elegant, lightweight, water resistant, 100% polyester fabric with a very tight, barely discernible weave with a satin finish. Measuring 7.5 mils thick and weighing 145 g/m², it combines a nice smooth feel with a bright-white surface ideal for reproducing colorful, finely detailed images and designs. It drapes beautifully for picture perfect table skirts and backdrops. LexJet Poly Select Light SUV is also a good choice for backlit displays, POP displays, store signage, trade-show graphics and banner stands. Poly Select Light SUV is compatible with solvent, low-solvent, UV and latex inks, providing an expanded color gamut and higher ink saturation for richer, more brilliant color.
Each roll now comes with easy-to-use core adapters that will allow you to run that 3-inch media on printers with 2-inch spindles. Click here to learn more.
An elegant, lightweight, water resistant, 100% polyester fabric with a satin finish.
Bright white point
POP displays & soft signage
Offers an expanded color gamut and higher ink saturation for richer, more brilliant color.
Lay-flat, print and cut solution
Indoor- up to 1 year. Outdoor- up to 3 months.
Compatible all inkjet printers using eco solvent, solvent, latex and UV-curable ink.
Due to the absorptive nature of the coating, you should avoid touching the coated surface. It's always recommended that cotton gloves be used when handling inkjet coated materials. Rolls of LexJet film are supplied with the coated side facing out.
To cut, use a sharp blade or hot knife on the back side of the fabric. Sewing is recommended for a hemmed edge. An alternative to sewing is Pole Tape 1" or .5".
The fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed. Contact the ink manufacturer for light-fastness data.
Optimal Print Environment
70° F (21° C), 50% R.H
For the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software. Using the 3M 180C or Avery MPI2010 profiles have been found to be a good place to start.
Ideal Storage Conditions
70° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging.
1 year from the LexJet ship date when stored in proper conditions.
The assigned numerical reading and other tests referenced in this text are not intended to reflect hazards presented by this or any other material under actual fire cognitions. Consult an architect or fire safety engineer for information on applicable building codes and reduction of fire hazards, including the use of sprinklers.
Product Performance & Suitability
Updated over 4 years ago